DeHy Reverb
€0.00*
in stock
Downloads
Our DeHy A1/A2 Kit allows you to optimize ergonomics and reliability of your Rock Shox Reverb Stealth, by replacing the bulky original hydraulic remote with our wire-actuating Triggy or 2X-Remote.
After conversion, your Reverb can be actuated by one of our standard cable remotes or by any other cable remote with enough cable pull. DeHy requires about 9mm of cable pull for maximum speed, which all our remotes provide.
DeHy A1/A2 is compatible with all Reverb Stealth versions of model years (MY) 2011-2016.
Note:
You can easily spot the difference between A1/A2 and the non-compatible B1 and C1 versions by the different looking upper tube. A1/A2 versions have a completely black upper tube, whereas B1 versions have a goldish or silverish looking "ROCKSHOX" logo on the upper tube, right underneath the seatpost´s head.
Installation is fairly easy, since it does not require any opening of the post´s internal hydraulics. You simply need to take off the original hydraulic hose and replace the lower unit with our DeHy assembly and install the shift cable and remote for actuation.
Another benefit is the availability and pricing of spare parts. In case of a damaged or ripped cable after a crash, you can easily find a shift cable and outer housing in basically any local bike shop nearby, whereas it is going to be hard to find an immediate replacement of the original hydraulic hose and fittings.
Compared to the original "Connectamajic" quick-connect hose, our DeHy saves quite some build height, which can be very useful in many cases to get some extra seatpost insertion into the seat tube.
Scope of delivery
- 1x full CNC aluminium DeHy assembly unit for Reverb Stealth
- 1x outer housing 1600mm
- 1x inner cable 1800mm
- 2x endcap for outer housing
- 1x squeeze endcap for inner cable
- 1x barrel cable clamp for inner wire
The DeHy A1/A2 Kit is compatible with Reverb Stealth models from the 2011–2016.
You can identify an A1/A2 Reverb by its all-black upper tube with no logo. On the newer B1 and C1 versions, the Reverb features a “ROCKSHOX” logo or a “reverb” logo (see image), which the A1/A2 versions do not have.
The DeHy B1 Kit is compatible with Reverb Stealth models from the 2017 - 2019.
Please note that some Reverb B1 models were already shipped in 2016. You can identify a Reverb B1 by the “ROCKSHOX” logo on the upper tube. Older versions have no logo there at all, while newer C1 versions feature a “reverb” logo.
The DeHy C1 Kit is compatible with the Reverb Stealth C1, which was introduced in the summer of 2019.
Note: Compatible only with standard hydraulic hoses! Not compatible with the Connectamajic connector on the Reverb C1.
It's easy to tell the Reverb C1 apart from older models. The C1 has a “reverb” logo on the top tube, while older versions have a “ROCKSHOX” logo (B1) or no logo at all (A1/A2).
