Topper
Downloads
Product information Topper
Product number:
TOPP-BLK
Just an extremely good looking feather-light full aluminum headset topcap made in one piece. Laser engraved and anodized in different colors for a classy matt/glossy finish.
Product information:
- Thread: Standard M6 (star nut standard)
- Weight: 5g
Nice to Have
Aimy
€16.00*
Aimy is a small but extremely useful little helper that makes working on your bike easier in two ways.Basically, it is just a spacer that is clamped around the steering tube of the fork. However, the highlight is that it also solves a known problem and prevents the fork from slipping out of the frame when stem and handlebars are removed from the bike.Another idea behind Aimy is the ability to align the stem if the handlebars have distorted after a crash or impact. Since Aimy stays in place, the clamping slot can be used as reference to realign the stem again.The prerequisite is, of course, that one surface of the clamping slot of Aimy and the corresponding side of the clamping slot of the stem are aligned with each other when installing.Product information:Weight: 8gHeight: 8mmSuitable steering tube diameter: 1 1/8"Production: CNC milled and laser engraved
Barkeeper
From
€89.00*
A great look and an exceptional strength-to-weight ratio are the main features of our Barkeeper stem.This fact is also due to the complex production of this high-quality masterpiece, which requires much effort and precision and involves various demanding tasks, such asprecise forging processMulti-temperingCNC machining of cristical contact interfacesShot peening for surface hardeningLaser engravingblack or transparent (RFF - Raw Forged Finish) anodized coating In collaboration with the reputable German testing institute EFBE, the Barkeeper not only fulfilled the requirements of the highest Category 5 but, but in some cases significantly exceeded them. This guarantees unrestricted and carefree use on “Trail” and “Enduro” bikes.Specs:Rise: 0°Stack height: 40mmClamping width: 50mmCompatible steerer tubes: 1 1/8"Compatible handlebar diameter: 35mm clampingUsage Cassification: Category 5 after ASTM F2043-13 or DIN EN 17406:2021 for handlebars up to 800mm widthMaterial: Aluminum Al-7075, multi-teperedWeights (titanium / steel bolts):35mm length: 80g / 86g45mm length: 90g / 96g55mm length: 106g / 112g1 set Barkeeper stem includes:1x stem1x set bolts + washers (steell)1x installation aid (wedge)2x installation screwoptional accessories:1x pair of 31.8 reducer sleeves1x set Ti-bolts T25 (black coated)1x Aimy (steerer clamp)1x Topper (headset topcap)Important Information:Due to the one-piece design of the stem, this stem is extremely light and stable, but unfortunately not compatible with all handlebar types, which we have deliberately taken into account.It is difficult to specify compatibility based on Rise alone, as the shape and bend of the handlebar also must be taken into accountAlthough handlebars with 35 mm Rise have been successfully tested, this does not automatically mean that they are generally compatible with our Barkeeper. However, we assume that the majority of handlebars with a rise of up to 30mm should fit.On the "compatible Handlebars" tab, you'll find a list maintained and updated to the best of our knowledge. This list is not binding and is for reference only. If you have successfully installed a handlebar, kindly inform us to include it in the list.Please make sure to follow the installation instructions in the manual!
Grippy
€25.00*
It would be overstating to say that we have developed the ultimate bike grip, as there are too many individual preferences that need to be taken into account in order to develop THE perfect grip. Nevertheless, we have thought intensively about improvements and possibly innovative approaches that have not yet been realized in a similar way.Eccentric designThe grip's rubber is eccentrically connected to the inner sleeve, which allows us to increase the cushioning on the palm side without increasing the diameter of the grip.Honeycomb structureOur Grippy grips are characterized by a honeycomb-like surface structure which, in combination with the selected material, is not only particularly robust, but also reduces wear without losing the outstanding damping qualities.Cut-out for additional paddingTo increase the damping on the outside of the grip, we have cut out the inner sleeve. As a result, the rubber extends to the diameter of the handlebar, which creates additional comfort where you need it.Integrated end capGrips often have to withstand contact with the ground or trees, so reliable side protection is crucial. That is why we have firmly integrated the end cap of the Grippy into the inner sleeve structure. The slightly widening diameter of the end cap also provides feedback about the end of the grip.Product information:Weight: 113g/pairLength: 140mmOuter diameter : 31mmCompatible handlebar diameter: 22.2mmClamp color: titanium grey anodizedMaterial grip rubber: TPRMaterial inner sleeve: NylonMaterial clamp: Aluminum, forged
Shifty
€31.90*
Our Shifty is an extremely effective tuning part for your SRAM rear derailleur.The original idler pulley of the SRAM 1x11 and 1x12 rear derailleurs is made of plastic and rotates on a steel axle without additional bearings.Particularly under poor weather conditions such as water, dirt and mud, the derailleurs can noticeably lose shifting precision. Instead of turning the pulley, the shift cable slides over the pulley with increased friction, causing imprecise shifting or so-called "ghost shifting".The Shifty is made of anodized 6061-T6 aluminium, rotates on a double-sealed stainless steel ball bearing and is simply installed in place of the original plastic pulley.Shifty fits the following rear derailleurs:XX1XX1 Eagle X01 X01 Eagle X01 DH X1 GX1 GX Eagle* EX1 NX* NX Eagle*Weight: 6.3gScope of delivery: 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings1x axle for mounting1x bolt for mounting*On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty.
Squeezy
€28.90*
In line with our commitment to constant improvement and distinctiveness, the Squeezy is more than just another seat clamp.The uniform wall thickness of the Squeezy ensures a more even and gentle clamping on the seat tube. As a result, higher clamping forces can be achieved at the same tightening torque.To prevent the clamp from slipping during assembly, the Squeezy only features three small slip-stops.The extremely elaborate CNC finish and the neat titanium Torx bolt complete the beautiful look and make the Squeezy an absolute lightweight at 7.9g (34.9/35mm).Especially when using dropper seatposts, an evenly distributed clamping force on the seat tube can have a positive effect on the function of the seatpost.The Squeezy is available for the following seat tube outer diameters.34mm34.9/35mm35.6mm36.4mm37mm38mm38.9/39mmFeaturesWeights: 7g (31.8mm) to 9g (39mm version)Material: AL-7075-T6, precision CNC finishTi-6Al-4V titanium clamping screw with T-25 Torx driveFlangeless design for even distribution of clamping forceSlip-stops as an assembly aid