Service kit for readjusting the lateral play of our dropper seatposts and renewing the wiper as part of the 100-hour service.Includes:1x Wiper6x Glide pin1x Lower bushing1x Foam ring1x C-clip1x Upper bushingNote:Our Service Kit Guide will help you to identify the right kit for your seatpost. You will find the serial number on the lower tube of your seatpost.
Replacement foam rings and bottom out bumper for your BikeYoke dropper post.The foam ring in the lower tube of your BikeYoke dropper post is a crucial component, that prevents water and dirt from entering your post too easily.Keep it dry and clean at all times, so your post can breathe and replace if needed.includes:4x foam ring25 mm:REVIVE 27228 mm:REVIVE 3.0REVIVE MAX 3.0DIVINE SLDIVINE SL Rascal31 mm:REVIVE 1.0/2.0DIVINE34 mm:REVIVE MAX 1.0/2.0
Note:During factory assembly upper bushings in every single REVIVE, REVIVE MAX and DIVINE are precision-calibrated with a special tool. Our official service centers have access to these tools. Replacement at home can (but does not have to) lead to increased friction between tubes. To achieve best results and proper fit, we therefore recommend replacing the upper bushing in one of the mentioned posts only at our service centres. compatibilty:dimensions in mm ID x OD x H22x24x7:REVIVE 27225x27x7:REVIVE 1.0 30.9/31.6REVIVE 2.0 30.9/31.6REVIVE 3.0 30.9/31.6DIVINE SL und Rascal (neue Generationen)*25x28x7:DIVINE SL and Rascal (older generations)*28x30x7:REVIVE MAX 1.0 34.9REVIVE MAX 2.0 34.9REVIVE MAX 3.0 34.9 * The DIVINE SL and Rascal can contain two bushing sizes, depending on the post generation. Earlier models use 25x28x7mm busihngs, newer ones use 25x27x7mm bushings.You can identify the correct version for your post via serial number and our service kit guide. The serial number can be found on the lower tube of the seatpost.includes:1x upper DU-bushing
This set includes a complete lower tube unit for DIVINE SL or Rascal. 30.9/31.6 are compatible with each other and allows the change of diameter of your post.This lower tube can also be used to convert DIVINE SL Rascal to DIVINE SL.Scope of delivery:1x lower support tube1x retaining ringFits for: DIVINE SLDIVINE SL Rascal
This set includes a complete lower tube unit for DIVINE SL or Rascal. 30.9/31.6 are compatible with each other and allows the change of diameter of your post.This lower tube can also be used to convert DIVINE SL to DIVINE SL Rascal.Scope of delivery:1x lower support tube1x retaining ringFits for: DIVINE SLDIVINE SL Rascal
Scope of delivery: 4x spacers for travel adjustmentFits with:REVIVEREVIVE MAXDIVINEDIVINE SL / RascalNote:The video under the Installation tab shows the installation process on a DIVINE. The REVIVE has a slightly different internal structure, but the installation is performed in the same way: Spacers must be clipped onto the shaft between the piston and seal head.
The upper seat clamp is compatible with all BikeYoke seat posts.Version 2.0 is the latest version.Scope of delivery:1x upper seat clampFits with:REVIVE / REVIVE 2.0REVIVE MAXREVIVE 272DIVINE SLDIVINE SL RASCAL
Saddle clamp bolt version 2.0 with integrated spherical washer.Our posts use two different lengths*:37mm for the front bolt40mm for the rear boltScope of delivery1x saddle clamp boltCompatible with:REVIVE / REVIVE 2.0REVIVE MAXDIVINEDIVINE SLDIVINE SL RASCAL*measures include head
includes:1x upper tube DIVINE / DIVINE SLPasst für: DIVINEDIVINE SL*DIVINE SL Rascal***on DIVINE SL only the lengths 80, 100 and 125 are possible**on DIVINE SL Rascal only the tube with 80mm length fits
NOTE: The actuator rod version 3.0 can only be used in combination with the REVIVE 3.0 foot unit respectively REVIVE MAX 3.0 foot unit (actuator).includes:1x actuator rod BikeYoke seatpostcompatible with: Standart > REVIVE / REVIVE 2.0 / REVIVE MAX / REVIVE MAX 2.0 / DIVINE / DIVINE SL (Rascal)Version 3.0 > REVIVE 3.0 / REVIVE MAX 3.0
