For Riders
For Wrenchers
No Bullshit
Filter
New
REVIVE 3.0 - silver ltd.
NOTE: To avoid overselling the limited edition and due to the shops stock counting method, the posts are labelled as ‘in stock’ in the web shop. However, the posts will be delivered in two waves. The first wave will be dispatched in calendar week 20. The remaining posts, if still available by then, will be in stock from calendar week 21.The REVIVE 3.0 silver ltd. is a special edition limited to 250 units.The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include:new saddle clamps for a 5mm lower stack heighta new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mmnew slide-on cable barrel for easier installationnew BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire)travel reduction in 5mm increments (4x5mm spacer included)3D-forged, one-piece upper tube for increased stiffness and strengthredesigned actuation linkage for imprived feel and feedbacktwo-piece saddle bolts with integrated conical washers for easier saddle mountingThe Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted.If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version.Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE THREE includes:1x REVIVE THREE seatpost1x cable housing 1600mm1x inner wire 1800mm1x cable barrel2x housing endcap1x cable crimp1x air valve adapter1x Quick-Reset-Lever4x 5mm travel adjust spacer1x remote (optional)1x BikeYoke I-spec adapter or Splits Clamp (optional)1 set titanium saddle bolts and nuts (optional)

From €350.00*
New
REVIVE MAX 3.0 - silver ltd.
NOTE:  To avoid overselling the limited edition and due to the shops stock counting method, the posts are labelled as ‘in stock’ in the web shop.   However, the posts will be delivered in two waves.  The first wave will be dispatched in calendar week 20. The remaining posts, if still available by then, will be in stock from calendar week 21. The REVIVE 3.0 silver ltd. is a special edition limited to 250 units.Our award-winning REVIVE dropper post is also available in a special oversized version for 34.9mm seat tubes - the Revive MAX 34.9. Not only has the lower diameter been adapted, but also the upper tube, which has increased in diameter from 25mm to 28mm to match the large-volume frames. This not only ensures a strong look, but also greater stiffness and stability.The new REVIVE MAX 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE MAX 3.0 include:new saddle clamps for a 5mm lower stack heighta new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mmnew slide-on cable barrel for easier installationnew BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire)travel reduction in 5mm increments (4x5mm spacer included)3D-forged, one-piece upper tube for increased stiffness and strengthredesigned actuation linkage for imprived feel and feedbacktwo-piece saddle bolts with integrated conical washers for easier saddle mountingThe REVIVE MAX 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted.If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version.Although all our remotes will work with the REVIVE MAX 3.0, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE THREE includes:1x REVIVE THREE seatpost1x cable housing 1600mm1x inner wire 1800mm1x cable barrel2x housing endcap1x cable crimp1x air valve adapter1x Quick-Reset-Lever4x 5mm travel adjust spacer1x remote (optional)1x BikeYoke I-spec adapter or Splits Clamp (optional)1 set titanium saddle bolts and nuts (optional)

From €370.00*
New
REVIVE 3.0
The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include:new saddle clamps for a 5mm lower stack heighta new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mmnew slide-on cable barrel for easier installationnew BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire)travel reduction in 5mm increments (4x5mm spacer included)3D-forged, one-piece upper tube for increased stiffness and strengthredesigned actuation linkage for imprived feel and feedbacktwo-piece saddle bolts with integrated conical washers for easier saddle mountingThe Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted.If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version.Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE THREE includes:1x REVIVE THREE seatpost1x cable housing 1600mm1x inner wire 1800mm1x cable barrel2x housing endcap1x cable crimp1x air valve adapter1x Quick-Reset-Lever4x 5mm travel adjust spacer1x remote (optional)1x BikeYoke I-spec adapter or Splits Clamp (optional)1 set titanium saddle bolts and nuts (optional)

From €350.00*
New
REVIVE MAX 3.0
Our award-winning REVIVE dropper post is also available in a special oversized version for 34.9mm seat tubes - the Revive MAX 34.9. Not only has the lower diameter been adapted, but also the upper tube, which has increased in diameter from 25mm to 28mm to match the large-volume frames. This not only ensures a strong look, but also greater stiffness and stability.The new REVIVE MAX 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE MAX 3.0 include:new saddle clamps for a 5mm lower stack heighta new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mmnew slide-on cable barrel for easier installationnew BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire)travel reduction in 5mm increments (4x5mm spacer included)3D-forged, one-piece upper tube for increased stiffness and strengthredesigned actuation linkage for imprived feel and feedbacktwo-piece saddle bolts with integrated conical washers for easier saddle mountingThe REVIVE MAX 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted.If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version.Although all our remotes will work with the REVIVE MAX 3.0, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE THREE includes:1x REVIVE THREE seatpost1x cable housing 1600mm1x inner wire 1800mm1x cable barrel2x housing endcap1x cable crimp1x air valve adapter1x Quick-Reset-Lever4x 5mm travel adjust spacer1x remote (optional)1x BikeYoke I-spec adapter or Splits Clamp (optional)1 set titanium saddle bolts and nuts (optional)

From €370.00*
REVIVE 272
The REVIVE 272 was developed with a special focus on gravel and XC use in mind and it is the first BikeYoke dropper for the 27.2mm seatpost standard.With travel of 80mm and an overall length of 400mm, it is ready for long extension on shorter seat tubes, but it is also designed to be trimmed down to 300mm, should you need a shorter post or if you only want to save some weight. Trimmed down to 300mm the post is weighing in at less than 340g.Of course, the REVIVE 272 also features the namegiving patented REVIVE hydraulic system with bleeding function, which with its celebrated and uniquely smooth function and reliability has already helped our REVIVE win various dropper comparison tests in international magazines and media.Remote compatibility:REVIVE 272 is compatible with any cable actuated remote which allows for cable clamping at the remote end (wire nipple at post end). Minimum required cable pull = 6mmDimensional specs:seatpost/seattube diameter: 27.2mm length overall (effective, middle saddle rails): 400mmdrop: 80mm (infinitely adjustable)Scope of delivery1x REVIVE 272 Seatpost (diameter 27.2mm, only)1x cable housing 1600mm1x inner wire 1800mm2x housing endcap1 set cable connector parts1x cable connector tool1x air valve adapter1x Quick-Reset-Lever1x remote (optional)1x BikeYoke I-spec adapter or Splits Clamp (optional)1 set titanium saddle bolts and nuts (optional)

From €370.00*
DIVINE
Whoever has been looking for a reliable dropper with brilliant ergonomics and function, superb finish quality, low weight and travel reduction, now finally can stop his search.In terms of smoothness, the DIVINE can not quite match the class leading REVIVE due to the different hydraulic system.But the DIVINE still gives you an outstanding build quality for a cheaper price-point and the auto-reset function will bleed your post with every full drop, so you won't have to worry about a squishy post anymore.If you are struggling between two sizes, you can feel free to choose the longer version, as the drop of the post can be reduced using 5mm spacers, whereby the number of spacers installed is not limited. This allows you to get the most of the available drop without the need to opt for a shorter version.Features:Auto-Reset-Function: Every full drop automatically bleeds the hydraulic circuit for suspension-free lock-out. Reducable maximum travelRotatable bottom part: In order to get maximum insertion into the frame, the foot of your DIVINE can be rotated by hand to avoid interference with one-sided bearing points or dents inside the seat tube area.Fully user-serviceable - all spare parts are available for customers, if needed.Scope of delivery:1x DIVINE 125 seatpost1x cable housing 1600mm1x inner wire 1800mm2x housing Endcap1x barrel cable clamp4x 5mm travel adjust spacer1x remote (optional)1x I-spec adapter (optional)1 set titanium saddle bolts and nuts (optional)

From €290.00*
DIVINE SL
Over the years, DIVINE SL has proven herself as a perfect addition to top-level race bikes. World Championship titles, Cape Epic victories, Olympic medals. The DIVINE SL has been equipped to many bikes of the best XC and marathon racers of this world.Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family and is now also available in 100mm and 125mm travel next to the popular 80mm version. Based on the award-winning and patented REVIVE technology, we´ve modified the internals to adapt to the shorter travel.Of course, you can mount and use your DIVINE SL also on bikes outside the XC department. However, the DIVINE SL was specifically designed in respect of XC riders' requirements and that's where it belongs and shines.One of the features is the "Tech-Climb" feature. While our DIVINE SL is completely locked in place in the top-out and bottom-out position for consistent riding position, the post can offer some amount of movement in the middle positions. We´ve found out, that extremely steep and technical (e.g. rooty or rocky) uphill sections can be conquered with much more ease, when the saddle is just slightly dropped (lets say about 1-2cm). Having the saddle dropped just a bit (and not completely), the "Tech-Climb" feature" also adds some suspension to the post, filtering the impacts of roots and rocks. Back fully extended or fully dropped, the post is rigid once again.Titanium saddle bolts, carbon and oval rail compatible forged clamping plates, tapered tubes. All of this comes stock on the DIVINE SL to achieve a sensational low weight.Another unique feature of our DIVINE SL: You can easily cut the lower tube, if you do not need the full length, and want to save some additional grams of weight instead. The 80mm version can be cut down by 115mm result in a total weight of significantly lower than 400g.The shorter travel allows the DIVINE SL to come with a design which doesn´t require manual resets like the REVIVE, but auto-resets itself with every full drop.Just like all our droppers, DIVINE SL requires internal routing on your frame.Scope of delivery:1x DIVINE SL 80 seatpost1x cable housing 1600mm1x Inner wire 1800mm2x housing Endcap1x remote (optional)1x BikeYoke I-spec adapter or Splits-clamp (optional)

From €330.00*
DIVINE SL Rascal
Well, what´s to say about our new DIVINE SL Rascal? Basically it's the shorter little brother of our world cup proven DIVINE SL, but unlike DIVINE SL, the new Rascal comes in a total length of only 320mm and can insert deeper and fully into the seattube of your frame - perfect for kids, short riders or gravel use.Besides a different lower tube, DIVINE SL and Rascal share all other parts.Tailored to the needs of XC, marathon racers and gravel enthusiasts, the DIVINE SL Rascal is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we´ve modified the internals to work perfectly with the shorter travel.Of course, you can mount and use your DIVINE SL Rascal also on bikes outside the XC department. However, the DIVINE SL was specifically designed in respect of XC riders' requirements.One of the features, is the "Tech-Climb" feature. While our DIVINE SL Rascal is completely locked in place in the top-out and bottom-out position for consistent riding position, the post can slightly spring in the middle positions. We´ve found out, that extremely steep and technical (e.g. rooty or rocky) uphill sections can be conquered with much more ease, when the saddle is just slightly dropped (lets say about 1-2cm). Having the saddle dropped just a bit (and not completely), the "Tech-Climb" feature" also adds some suspension to the post, flitering the impacts of roots and rocks. Back fully extended or fully dropped, the post is rigid again.Titanium saddle bolts, carbon and oval rail compatible forged clamping plates, tapered tubes. All of this comes stock on the DIVINE SL Rascal to achieve a sensational low weight of 365g (30.9).Of course, our DIVINE SL Rascal requires internal routing of the cable through your frame.Scope of delivery:1x DIVINE SL Rascal Seatpost1x cable housing 1600mm1x inner wire 1800mm2x housing endcap1x remote (optional)1x BikeYoke I-spec adapter or Splits clamp (optional)

From €330.00*