Our extremely good-looking, feather-light all-aluminum headset topcap is now also available in a high version. It is made from one piece and has an integrated 5 mm spacer. Laser engraved and anodized in different colors for a classy matt/glossy finish.

Our Shifty is an extremely effective tuning part for your SRAM rear derailleur.The original idler pulley of the SRAM 1x11 and 1x12 rear derailleurs is made of plastic and rotates on a steel axle without additional bearings.Particularly under poor weather conditions such as water, dirt and mud, the derailleurs can noticeably lose shifting precision. Instead of turning the pulley, the shift cable slides over the pulley with increased friction, causing imprecise shifting or so-called "ghost shifting".The Shifty is made of anodized 6061-T6 aluminium, rotates on a double-sealed stainless steel ball bearing and is simply installed in place of the original plastic pulley.Shifty fits the following rear derailleurs:XX1XX1 Eagle X01 X01 Eagle X01 DH X1 GX1 GX Eagle* EX1 NX* NX Eagle*Weight: 6.3gScope of delivery: 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings1x axle for mounting1x bolt for mounting*On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty.

In line with our commitment to constant improvement and distinctiveness, the Squeezy is more than just another seat clamp.The uniform wall thickness of the Squeezy ensures a more even and gentle clamping on the seat tube. As a result, higher clamping forces can be achieved at the same tightening torque.To prevent the clamp from slipping during assembly, the Squeezy only features three small slip-stops.The extremely elaborate CNC finish and the neat titanium Torx bolt complete the beautiful look and make the Squeezy an absolute lightweight at 7.9g (34.9/35mm).Especially when using dropper seatposts, an evenly distributed clamping force on the seat tube can have a positive effect on the function of the seatpost.The Squeezy is available for the following seat tube outer diameters.34mm34.9/35mm35.6mm36.4mm37mm38mm38.9/39mmFeaturesWeights: 7g (31.8mm) to 9g (39mm version)Material: AL-7075-T6, precision CNC finishTi-6Al-4V titanium clamping screw with T-25 Torx driveFlangeless design for even distribution of clamping forceSlip-stops as an assembly aid

This adapter allows you to mount our Triggys directly to a Shimano brake lever, which features an I-Spec-B standard and thus save a clamp on the handlebar.This provides a clean cockpit and a fantastic look.Moreover, many other remotes and shifters that offer a SRAM Matchmaker Standard can be combined with the I-Spec adapters (see compatibility).I-Spec B adapters have a flip-flop design and can be mounted on the left or right side.

Aimy is a small but extremely useful little helper that makes working on your bike easier in two ways.Basically, it is just a spacer that is clamped around the steering tube of the fork. However, the highlight is that it also solves a known problem and prevents the fork from slipping out of the frame when stem and handlebars are removed from the bike.Another idea behind Aimy is the ability to align the stem if the handlebars have distorted after a crash or impact. Since Aimy stays in place, the clamping slot can be used as reference to realign the stem again.The prerequisite is, of course, that one surface of the clamping slot of Aimy and the corresponding side of the clamping slot of the stem are aligned with each other when installing.Product information:Weight: 8gHeight: 8mmSuitable steering tube diameter: 1 1/8"Production: CNC milled and laser engraved

Just an extremely good looking feather-light full aluminum headset topcap made in one piece. Laser engraved and anodized in different colors for a classy matt/glossy finish.Product information:Thread: Standard M6 (star nut standard)Weight: 5g

This adapter allows you to mount our Triggys directly to a Shimano brake lever, which features an I-Spec-II standard and thus save a clamp on the handlebar. This provides a clean cockpit and a fantastic look.Moreover, many other remotes and shifters that offer a SRAM Matchmaker Standard can be combined with the I-Spec adapters (see compatibility).

Don't forget the Willy!Maybe you've seen this before.Some riders protect their seat tube from dirt and mud by cutting off a piece of old inner tube, wrapping it around the seat post and seat tube and securing it with cable ties. This precaution makes sense, as mud and dirt gets collected on the seat clamp and seat tube in bad weather and subsequently penetrate the inside of the seat tube, causing annoying creaking and scratches on the seat post.Our Willy does no more nor less, only it solves this problem much more simply and aesthetically. It is made of highly elastic silicone and is available in two different sizes.Suitable seat post diameter:Willy: 30.9/31.6Willy Max: 34.9Important note:The appearance of the Willy depends on the saddle clamp used! Our Willy, can be stretched very well however, within certain limits. There are quite large saddle clamps with long or protruding bolt heads and sharp shapes, which can damage the Willy in the long term because it is stretched too much in certain areas. We may therefore point out that we cannot guarantee that our Willy will work well with all saddle clamps in the long term.We recommend applying a little grease to the inside of the Willy to make it easier to put on and to reduce the strain in certain areas.

Our cleverly designed split clamp is used to attach our Triggy to the handlebar. A special plastic and manufacturing process make the clamp flexible enough that you don't even have to remove brakes or grips to attach it. You simply clip our split clamp over the handlebar. A specially heat-treated and laser-engraved stainless steel strip as an insert ensures an elegant look and perfect clamping force.By the way, you can also attach SRAM shift levers to the handlebar with our split clamp.

This adapter allows you to mount our Triggys directly to a Shimano brake lever, which features an I-Spec-EV standard and thus save a clamp on the handlebar.This provides a clean cockpit and a fantastic look.Moreover, many other remotes and shifters that offer a SRAM Matchmaker Standard can be combined with the I-Spec adapters (see compatibility).